preprocessing/data/motherboard_v3/calibration/calibration.json
1.7 KB · 32 lines · json Raw
1 {
2 "task": "motherboard_v3",
3 "calibration_id": "sept-09",
4 "created": "2026-09-09",
5 "method": "PNP (0.70 px middle)",
6 "applies_to_dates": [
7 "2026-09-11",
8 "2026-09-12"
9 ],
10 "rmse_unit": "px",
11 "cameras": {
12 "left": {
13 "camera_serial": "104122062574",
14 "rmse": 0.5820335045117107,
15 "created_at": "2026-09-09T07:41:39"
16 },
17 "middle": {
18 "camera_serial": "217222066989",
19 "rmse": 0.6957969799496961,
20 "created_at": "2026-09-09T07:41:39"
21 },
22 "right": {
23 "camera_serial": "143322063538",
24 "rmse": 0.6641288760028174,
25 "created_at": "2026-09-09T07:41:39"
26 }
27 },
28 "projection_chain": "sensor_pose (mocap mm) -> T_mocap_to_cam -> camera intrinsics -> pixel; gel center via T_gel_to_rigid",
29 "note": "Staged 2026-09-14T22:30:23 from the React release calibration /group2/ct/weihanx/world_model/React/data/motherboard/calibration/epoch_2026-09-09 (Y-up, undeclared), converted to Z-up with React/toolbox/frames.py YUP_TO_ZUP so it pairs with the Z-up React parquets. Bit-identical to data/validation/calibration (same sept-09 epoch). calib_points_*.json is the raw Y-up capture record. Solved on 2026-09-09 at 07:41, a few hours after the recordings it is applied to. The recorder's live overlay ran on the June-26 epoch during collection, and projecting the GelSight centres into a mid-episode frame puts June-26 on the sensors while this epoch sits 20-40 px away; both solves fit their own points to 0.5-0.7 px and share an identical gel-to-rigid transform, so they disagree only about where the cameras were. This epoch is the operator's choice. The June-26 files are in the repository as calibration/epoch_2026-06-26 if you want to compare.",
30 "up_axis": "z",
31 "source": "/group2/ct/weihanx/world_model/React/data/motherboard/calibration/epoch_2026-09-09"
32 }